Electric Control Cabinet and LCU Cabinet for Gate and Pumping Station Automation
Motor control centre and LCU control cabinets for gate hoists and pumping stations, with local HMI operation, remote SCADA control, gate opening feedback, limit protection and independent operation when the network fails. outdoor-ready enclosure, complete factory testing and.
Product Overview
YOKORN electric control cabinets and LCU (Local Control Unit) cabinets bring motor starting, gate hoist control and local HMI operation together in one industrial-grade enclosure, designed for unattended operation at gates, dams and pumping stations.
Standard Features
- Gate hoist control: open / close / stop / opening adjustment with opening meter feedback
- Upper and lower limit protection, jam detection and torque protection
- Local HMI touch screen plus remote SCADA control with permission management
- Independent LCU operation under preset logic when the communication network fails
- Motor starters: direct-on-line, star-delta, soft start or VFD as required
- Outdoor-ready enclosure: rainproof, ventilated, with heater and lighting
Quality Control
Every cabinet passes insulation testing, power-on testing and simulated operation before delivery. Wiring follows the project's as-built drawings with numbered ferrules on every core, and each cabinet ships with its factory test report.
Delivered Projects
Cabinets of this series are operating in gate automation projects in Jiangxi and Fujian, pumping station projects across Guangdong, and reservoir gate control systems in Shenzhen and Gansu.
Standards & Build
- MCC sections designed per IEC 61439-2; busbar sizing and short-circuit withstand documented per project spec.
- Motor protection: overload, phase loss, dry-run and surge protection as standard; VFD or soft-starter feeders on request.
- Local HMI operation with remote SCADA takeover; gate opening feedback and level/priority interlocks wired to the LCU.
- IEC 60870-5-104, DNP3 and Modbus RTU/TCP supported for dispatch-center integration.
Typical Applications
- Pumping station motor control centres for water and sewage plants
- Gate hoist LCU cabinets for sluice gates and dam projects
- Combined MCC + LCU supply for turnkey automation contractors